Main use
　　CG-2 that contain a strong slow infiltration and high turbidity agents secure chemical detergents, soluble carbonate scale, minerals and rust, verdigris and so on. With the CG-1 detergent addition to embroidered agent mixture can also remove silica scale, iron, and special deposits tumors.

　　1, central air conditioning host condenser, evaporator, pressure injection machine, injection molding machines and other heat exchangers, cooling water pipes, cooling towers such as scale, rust, dirt and sediment can eliminate. 。

　　2, various production lines circulation devices, such as breweries bottle washing machines, air-conditioning plant degreasing and phosphate production line, air compressor oil cooling, the cold, after the cooler scale, rust, dirt and sediment can be removed.

　　3, medium-sized diesel generator sets oil cooler, the cooler, inside and outside the cooling circulatory system: medium-sized Turbine cooling pipeline descaling rust dirt sediment washing, etc. In addition to clay.

　　4, boiler, stove, water heaters, water boiler scale removal of rust, dirt and sediment washing. Feature

Feature
　　Appearance: dark red liquid ratio: 1.05 ± 0.02g/cm3 PH value: a pyrophoric nature: non-combustible packing: 30kg / barrel

Use
　　Cleaning the condenser, heat exchanger, such as a single device with a pump, tank, connecting hose and the equipment to be self-cleaning to do a small cycles, according to the total water capacity of small cycles to determine CG-2 dosage. According to scale, dirt magnitude of 3-15 times the ratio between the choice, it is very serious when the scale when the small cycles of water each 3kg capacity by adding 1kgCG-2; general scaling volume (scale thickness ≤ 2mm) by small cycles for every 10 kg water capacity by adding 1 kg of the CG-2, open-circulating pump cleaned 2-4 hours, washing liquid smoke at a time when no obvious air bubble circulating fluid of the PH value of ≤ 2, the shows have been lowered in clean dirt scale. After the sewage washed 1-2 times with water can be (if necessary, pre-film results better). Other equipment, production line cleaning requests to the company to receive instructions corresponding to equipment cleaning procedures and experience in an introductory statement skills.

Note:
　　1, this product is acidic, prolonged exposure to skin and use rubber gloves when used carelessly splashed in the eyes, please rinse immediately with plenty of water.

　　2, the heating would be better to use, but the temperature should be <60 ℃, prolonged storage or cold storage areas will be lighter color, but its performance remain unchanged.

　　3, placed in a cool well-ventilated place, is a prohibited chemical consumption. Please use the special circumstances around the corporate advisory.